FUSION3 3D PRINTERS:
CERTIFIED MATERIALS LIST (SEARCHABLE)
Our 3D printers print a wide variety of branded materials in all major 3d filament types. Here is a list of all the filaments currently certified for use with Fusion3 3D printers.
Fusion3 3D Printers only use 1.75MM filament
New additions highlighted in ORANGE
| Type | Manufacturer | Name | Notes | Date Added | Example |
|---|---|---|---|---|---|
| ABS | 3DXTech | ABScent™ ABS | Transparent | 01/02/2019 | |
| ABS | 3DXTech | 3DXMAX® ABS | 04/17/2018 | ||
| ABS | 3DXTech | "CarbonX" Carbon Fiber ABS | Carbon Fiber Reinforced | 07/09/2017 | |
| ABS | 3DXTech | ESD-ABS | Electrostatic Discharge | 06/09/2017 | |
| ABS | 3DXTech | 3DXMAX® PC-ABS | Polycarbonate/ABS Blend | 06/09/2017 | |
| ABS | Amazon | ABS | 05/03/2019 |  | |
| ABS | Atomic Filament | Carbon Fiber ABS | Carbon Fiber Reinforced | 04/17/2018 | |
| ABS | Atomic Filament | ABS | 01/01/2018 | ||
| ABS | BASF Innofil3D | ABS | 09/23/2019 | ||
| ABS | COEX | ABS | 05/03/2019 | ||
| ABS | Filaments.ca | ABS | 08/18/2017 | ||
| ABS | Filaments.ca | CF-ABS | Carbon Fiber Reinforced | 08/18/2017 | |
| ABS | FormFutura | ABS | 05/20/2019 | ||
| ABS | Hatchbox | ABS | 08/18/2017 | ||
| ABS | IC3D | ABS | 06/09/2017 | ||
| ABS | Keene Village Plastics | ABS | 10/08/2018 | ||
| ABS | MatterHackers | Pro ABS | 10/08/2018 | ||
| ABS | Meltink | ABS | 12/01/2017 | ||
| ABS | Premix | Preperm ABS550 | Dielectric / Low Loss (5.5er) | 01/02/2019 | |
| ABS | Premix | Preperm ABS300 | Dielectric / Low Loss (3.0er) | 01/02/2019 | |
| ABS | Proto-Pasta | PC-ABS | Polycarbonate/ABS Blend | 05/03/2019 | |
| ABS | Push Plastic | ABS | 05/20/2019 | ||
| ABS | Ultimachine | ABS | 01/01/2018 | ||
| ABS | Verbatim | ABS | 12/01/2017 | ||
| ASA | 3DXTech | 3DXMAX® ASA | "combines mechanical strength, UV resistance and water resistance" | 07/09/2017 | |
| ASA | 3DXTech | 3DXMAX® PC/ASA | Polycarbonate/ASA Blend | 06/09/2017 | |
| ASA | Filaments.ca | ASA | "combines mechanical strength, UV resistance and water resistance" | 08/18/2017 | |
| ASA | Fillamentum | ASA | "combines mechanical strength, UV resistance and water resistance" | 01/01/2018 | |
| ASA | FormFutura | ApolloX | "Modified ASA for almost injection molding like precision" | 09/23/2019 | |
| ASA | Toner Plastics | ASA | "combines mechanical strength, UV resistance and water resistance" | 01/01/2018 | |
| CO-POLYESTERS | ColorFabb | HT | TG of 100*C, "excellent durability and toughness" | 01/02/2019 | |
| CO-POLYESTERS | ColorFabb | HT Clear | TG of 100*C, "excellent durability and toughness" | 01/02/2019 | |
| CO-POLYESTERS | ColorFabb | XT | Transparent | 01/01/2018 | |
| CO-POLYESTERS | ColorFabb | XT-CF20 | Carbon Fiber Reinforced | 01/01/2018 | |
| CO-POLYESTERS | ColorFabb | nGen | 07/09/2017 | ||
| FLEX (TPU/TPE) | Filaments.ca | TPU (90A) | 06/09/2017 | ||
| FLEX (TPU/TPE) | Fillamentum | Flexfill 98A | 01/01/2018 | ||
| FLEX (TPU/TPE) | NinjaTech | SemiFlex | 01/01/2018 | ||
| FLEX (TPU/TPE) | NinjaTech | Cheetah | 12/01/2017 | ||
| FLEX (TPU/TPE) | Polymaker | TPU95 (Was Polyflex) | 07/09/2017 | ||
| FLEX (TPU/TPE) | Taulman3D | PCTPE | "Texture of nylon, added flexibility, yet durable" | 01/01/2018 | |
| HIPS | Ultimachine | HIPS | 01/01/2018 | ||
| NYLON | 3DXTech | AmideX™ PA6-GF30 | Glass Fiber Reinforced | 09/23/2019 | |
| NYLON | 3DXTech | iOn™ Nylon | "High thermal resistance, superior impact strength, improved solvemnent resistance" | 06/09/2017 | |
| NYLON | Breathe3DP | Carbon Fiber Nylon | Carbon Fiber Reinforced | 09/23/2019 | |
| NYLON | Filaments.ca | CF Nylon | Carbon Fiber Reinforced | 05/20/2019 | |
| NYLON | Filaments.ca | Nylon 12 (PA-12) | 08/18/2017 | ||
| NYLON | MatterHackers | NylonX | Carbon Fiber Reinforced | 07/09/2017 | |
| NYLON | Matterhackers | NylonG | Glass Fiber Reinforced | 09/23/2019 | |
| NYLON | Polymaker | PolyMide™ PA6-CF | Carbon Fiber Reinforced | 09/23/2019 | |
| NYLON | Polymaker | PolyMide™ PA6-GF | Glass Fiber Reinforced | 09/23/2019 | |
| NYLON | Taulman3D | Alloy 910 | "High tensile strength, durable, low shrinkage, chemical resistant, 90*C TG" | 01/01/2018 | |
| NYLON | Taulman3D | Bridge Nylon | 01/01/2018 | ||
| NYLON | Taulman3D | Nylon 680 | "FDA food and beverage rated" | 01/01/2018 | |
| NYLON | Taulman3D | Nylon 645 | "High tensile strength, chemical resistant" | 06/09/2017 | |
| NYLON | Treed | Carbonium | Carbon Fiber Reinforced | 05/20/2019 | |
| OTHER | Polymaker | Polysmooth | "Can be smooothed with Alcohol for layer free models" | 12/01/2017 | |
| OTHER | Treed | Architectural: Brick | Brick powder added | 05/03/2019 | |
| OTHER | Treed | Architectural: Clay | Clay powder added | 05/03/2019 | |
| OTHER | Treed | Architectural: Caementum | Cement powder added | 05/03/2019 | |
| OTHER | Treed | Architectural: Dark Stone | Dark Stone powder added | 05/03/2019 | |
| OTHER | Treed | Architectural: Monumental | Marble-like powder added | 05/03/2019 | |
| OTHER | Treed | Architectural: Sandy | Sand added | 05/03/2019 | |
| PETG / PET | 3DXTech | MAX-G™ GF-20 | Glass Fiber Reinforced | 09/23/2019 | |
| PETG / PET | 3DXTech | MAX-G™ PETG | 04/17/2018 | ||
| PETG / PET | 3DXTech | 3DXStat ESD-PETG | Electrostatic Discharnge | 08/18/2017 | |
| PETG / PET | 3DXTech | CarbonX™ Carbon Fiber PETG | Carbon Fiber Reinforced | 06/09/2017 | |
| PETG / PET | 3DXTech | Thermax™ GT High-Temp PETG | High TG PETG (100*C) | 06/09/2017 | |
| PETG / PET | Amazon | PETG | 05/03/2019 |  | |
| PETG / PET | Atomic Filament | PETG | 01/01/2018 | ||
| PETG / PET | Atomic Filament | Carbon Fiber PETG | Carbon Fiber Reinforced | 01/01/2018 | |
| PETG / PET | BASF Innofil3D | PET | 09/23/2019 | ||
| PETG / PET | COEX | PETG | 05/03/2019 | ||
| PETG / PET | E3D Online | Edge | 01/01/2018 | ||
| PETG / PET | Filaments.ca | PETG | 08/18/2017 | ||
| PETG / PET | Hatchbox | PETG | 12/01/2017 | ||
| PETG / PET | IC3D | PETG | 05/20/2019 | ||
| PETG / PET | Keene Village Plastics | PETG | 10/08/2018 | ||
| PETG / PET | Push Plastic | PETG | 01/01/2018 | ||
| PETG / PET | Taulman3D | guidel!ne | "High glass transition PETG, FDA safe in raw form" | 09/23/2019 | |
| PETG / PET | Taulman3D | T-Glase | "FDA safe in raw form, low TG" | 01/01/2018 | |
| PETG / PET | Toner Plastics | PETG | 01/01/2018 | ||
| PETG / PET | Verbatim | PET | 01/01/2018 | ||
| PLA | 3D4Makers | Facilian C8 | "Higher tensile strength than ABS, higher impact strength than ABS" | 10/08/2018 | |
| PLA | 3D-Fuel | Pro PLA (v2) | "Higher impact strength than ABS and Standard PLA with a heat resistance rivaling that of ABS" | 10/08/2018 | |
| PLA | 3D-Fuel | Workday PLA (was Advanced PLA) | "Stronger and more heat resistant than standard PLA" | 12/01/2017 | |
| PLA | 3DXTech | ECOMAX® PLA | 09/23/2019 | ||
| PLA | 3DXTech | ESD-PLA | Electostatic Discharge | 05/20/2019 | |
| PLA | 3DXTech | CarbonX™ Carbon Fiber PLA | Carbon Fiber Reinforced | 04/17/2018 | |
| PLA | Amazon | PLA | 05/03/2019 |  | |
| PLA | Atomic Filament | PLA | 01/01/2018 | ||
| PLA | Atomic Filament | Carbon Fiber PLA | Carbon Fiber Reinforced | 12/01/2017 | |
| PLA | Atomic Filament | Glow in the Dark PLA | Glow-In-The-Dark | 07/09/2017 | |
| PLA | BASF Innofil3D | PLA | 09/23/2019 | ||
| PLA | BuMat | PLA | 09/23/2019 | ||
| PLA | Casius Tech | PLA | 10/08/2018 | ||
| PLA | COEX | PLA | 05/03/2019 | ||
| PLA | ColorFabb | PLA/PHA | 01/01/2018 | ||
| PLA | ColorFabb | GlowFill | Glow-In-The-Dark | 01/01/2018 | |
| PLA | ColorFabb | Woodfill | Wood Filled | 01/01/2018 | |
| PLA | Essentium | PLA XTR | "Decreased Brittleness, superior tensive strength, better impact resistance" | 05/20/2019 | |
| PLA | eSUN | PLA+ | 10/08/2018 | ||
| PLA | Filaments.ca | PLA | 08/18/2017 | ||
| PLA | Filaments.ca | CF-PLA | Carbon Fiber Reinforced | 08/18/2017 | |
| PLA | Filaments.ca | TRUE Food Safe PLA | Food safe (FDA Approved Raw Materials) | 08/18/2017 | |
| PLA | Filkemp | PLA 881N | 04/17/2018 | ||
| PLA | Flenstech | PLA | 09/23/2019 | ||
| PLA | FormFutura | EasyFill PLA | 10/08/2018 | ||
| PLA | FormFutura | MetalFil - Brass,"70% metal powder | "real brass look and "cold" brass metal feel" | 10/08/2018 | |
| PLA | FormFutura | MetalFil - Classic Copper | 80% metal powder, "real copper look and 'cold' copper metal feel" | 10/08/2018 | |
| PLA | FormFutura | MetalFil - Ancient Bronze | 80% metal powder, "real bronze look and 'cold' bronze metal feel" | 10/08/2018 | |
| PLA | Hatchbox | PLA | 01/01/2018 | ||
| PLA | IC3D | PLA | 06/09/2017 | ||
| PLA | JustPLA | JustPLA | 12/01/2017 | ||
| PLA | Keene Village Plastics | PLA | 10/08/2018 | ||
| PLA | Keene Village Plastics | Perfromance PLA | "High heat, high impact grade of PLA… alternative to ABS" | 10/08/2018 | |
| PLA | Matterhackers | PRO Series Tough PLA | "Engineered for strength and durability… reliability and ease-of-use of PLA" | 09/23/2019 | |
| PLA | Meltink | PLA/PHA | 12/01/2017 | ||
| PLA | Meltink | PLA | 12/01/2017 | ||
| PLA | Proto-Pasta | Composite Conductive PLA | Electrically Conductive (2-3kohm) | 05/03/2019 | |
| PLA | Proto-Pasta | Copper PLA | Copper (Metal) Refinforced | 05/03/2019 | |
| PLA | Proto-Pasta | HTPLA | High Temperature Resistance | 05/03/2019 | |
| PLA | Proto-Pasta | Brass-Filled HTPLA | Brass (Metal) Reinforced | 05/03/2019 | |
| PLA | Proto-Pasta | Bronze-Filled HTPLA | Bronze (Metal) Reinforced | 05/03/2019 | |
| PLA | Proto-Pasta | Iron-Filled PLA | Iron (Metal) Reinforced | 05/03/2019 | |
| PLA | Proto-Pasta | Carbon Fiber PLA | Carbon Fiber Reinforced | 01/01/2018 | |
| PLA | Push Plastic | PLA | 09/23/2019 | ||
| PLA | Sainsmart | PRO-3 Series PLA | 09/23/2019 | ||
| PLA | Taulman3D | InPLA | "Transparent, low warp, shiny finish" | 01/01/2018 | |
| PLA | Ultimachine | PLA | 01/01/2018 | ||
| PLA | Verbatim | PLA | 05/20/2019 | ||
| PLA | Ziro3D | CF-PLA | Carbon Fiber Reinforced | 01/01/2018 |  |
| POLYCARBONATE | 3DXTech | ESD Safe PC | Electrostatic Discharnge | 05/20/2019 | |
| POLYCARBONATE | COEX | Polycarbonate | 05/03/2019 | ||
| POLYCARBONATE | Filaments.ca | "Easy" PC | 12/01/2017 | ||
| POLYCARBONATE | Keene Village Plastics | Polycarbonate | 05/20/2019 | ||
| POLYCARBONATE | Polymaker | PolyMax PC | 01/02/2019 | ||
| POLYCARBONATE | Priline | Carbon Fiber PC | Carbon Fiber Reinforced | 01/02/2019 | |
| POLYCARBONATE | Push Plastic | PC+PBT | "109*C TG, stiffness, impact performance, chemical resistance, of polycarbonate, easier to print" | 06/09/2017 | |
| POLYCARBONATE | Ultimachine | Polycarbonate | 01/01/2018 |